Fluke 709 Precision HART Loop Calibrator - Zimtechtools

Fluke 709 Precision HART Loop Calibrator

Fluke

  • £795.95


Product Information

Precision Loop Calibrator

Fluke puts HART communication in a precision loop calibrator.

The Fluke 709 and 709H mA loop calibrators are designed to save time and produce high-quality results. These calibrators are built around a user friendly interface with a Quick-Set rotary encoder knob. This tool reduces the time it takes to measure, or source, current and power up a loop. The protective holster easily ts into a technician’s hand and the large backlit display is easy to read, even in dark, cramped worked areas.

Hart communications

The 709H adds HART communications and supports a select set of the HART universal and common practice commands. This makes the 709H unique as both an affordable, compact loop calibrator and powerful HART communication troubleshooting tool.

     In the communicator mode the user will be able to read basic device information, perform diagnostic tests, and trim the mA output on most HART enabled transmitters. In the past, this could only be done with a dedicated communicator, a high-end multifunction calibrator, or a laptop computer with HART modem. Fluke 709H will allow virtually any technician to service and support HART devices.

Saving time, getting answers

In addition, the 709H offers:

  • Logging of HART data in the field. Once recorded by the 709H in the field, the 709H/TRACK software can upload the HART configuration of up to (20) HART devices in your plant and output data in either (.csv) or (.txt) format.
  • Data logged mA loop measurements and HART data can be recorded from a particular transmitter for troubleshooting and loop tuning.  The data log feature  offers selectable capture with recording intervals   of 1 to 60 seconds and a logging capacity of 9800 records or 99 individual sessions. Each data sample contains the 709H mA measurement, all four process variables, and the standard status conditions.

 

Features

  • Best in class 0.01 % reading accuracy
  • Large, easy-to-read display with backlight and contrast adjust
  • Two simple connections and protection up to 240 V ac
  • Intuitive interface with quick click knob
  • User selectable 250 Ω resistor
  • Dedicated span and 25 % step buttons.
  • Valve test, ramp, 25 % auto-step functions

What's In The Box

  • Two AC72-1 Alligator Clips
  • TL75 Test Leads
  • Soft case
  • Six AAA batteries (installed)
  • Product Manual
  • Quick Reference Guide
  • Safety Information
  • NIST traceable calibration certificate with data

Specifications

Functions mA source, mA simulate, mA read, mA read/loop power, and volts read.
Ranges mA (0 to 24mA) and Volts (0 to 30VDC)
Resolution 1uA on mA ranges and 1mV on voltage range
Accuracy 0.01% +/- 2 counts all ranges (@23° +/- 5°C)
Operating temperature range -10 °C to 55 °C (14 °F to 131°F)
Humidity range 10 to 95% non-condensing
Stability 20ppm of F.S. /°C from -10°C to 18°C and 28°C to 55°C
Display 128 x 64 pixels, LCD Graphic w/backlight, .34" high digits
Power 6 AAA alkaline
Battery Life ≥ 40 hours continuous use (measure mode using alkaline)
Loop Compliance Voltage 24VDC @ 20mA
Over-Voltage Protection 240VAC
Overload Current Protection 28mA DC
EMC EN61326 Annex A (Portable Instruments)
Dimensions (L x W x D) 15 cm x 9 cm x 3 cm (6" x 3.6" x 1.3")
Weight 0.3 kg (9.5 ounces)
Included Accessories NIST traceable calibration certificate with data, batteries, test leads, and manual

We Also Recommend